Swimming in a pool filled with cool, clear water is a great way to escape the heat in summer. However, the idea of swimming in a dirty pool could dampen the excitement and make all friends run away.
The appearance of stains of various kinds is a common issue in pool management, and it needs regular maintenance to be solved.
Ascorbic acid treatment is one of the best for cleaning up stains around the pool. So, in this article, we’ll see how to clean pool stains with ascorbic acid pool treatment.
How to Clean Pools Stains With Ascorbic Acid
1. The first step is about purchasing ascorbic acid for pool stains.
2. However, before the treatment, turn off all equipment in the vicinity of the pool, including chlorinators, metal ionizers, power generators, UV water disinfection systems, and ozone generators. When cleaning the pool with very invasive chemical treatments, don’t let the water come into contact with the heating, chlorination, or any other system.
3. Reduce the chlorine level in the pool to around 0 and 2ppm to reduce the quantity of ascorbic acid needed.
4. You can speed up the whole process by adding some sodium thiosulfate into the water. Ensure you follow the instructions given on the packaging from the manufacturer.
5. Pour an algaecide product into the pool to prevent algae from forming during the period when the chlorine level is very low.
6. Since mineral residues react better to chemical treatments, if you believe that the stains in the pool are caused by metals dissolved in the water, try using an ascorbic acid-based chemical. It is an acid found in some citrus juices that can be very potent in high concentrations. Optionally, you can try a home remedy by crumbling vitamin C for pools and rubbing on the areas to be treated. Vitamin C and chlorine can also be combined for effective cleaning.
7. If the stain is very extensive, treat it with ascorbic acid, which is added directly to the water: spreading it over the pool surface. You can start with 1/2 pound (225 grams) of ascorbic acid for every 10,000 gallons (37,850 liters) of water.
8. Set the pool filter to the “recirculation” function and activate the relevant pump. Wait half an hour so that the acid has time to act.
9. Add some more of the ascorbic acid while keeping the pool filter system running on “recirculation” mode for another 30 minutes if there are leftover stains. Repeat the process till you have a clean pool.
10. When finished, restore the correct values relating to the chemical balance of the tank water. You have to monitor and balance the pH levels, alkalinity, and hardness based on the size of the pool.
11. Place a new tablet or dose of metal sequestrator in your skimmer basket to prevent the appearance of stains on the walls and bottom of the pool during the entire season.
Ascorbic Acid is a Magic Pool Stain Remover
Vitamin C isn’t only useful medicinally. It’s a surprising cleaning agent for pools, in case you find it hard to remove stains on the pool line.
Try using vitamin C tablets. You will have to crush them (for example by hitting them with an object after putting them in a plastic bag) hard to remove them directly on the areas to be treated.
You will most likely need to brush a little, but the stains will disappear in no time in most cases.